Intel R2000WT Server System BIOS/Firmware 1.01.0009

  • 21DOWNLOADS
  • Shareware

    Freeware

  • VIRUS REPORTS

    100%Clean

    virus check results

  • USER RATING

    4.8/5 (625votes)

    vote

  • RUNS ON

    OS Independent

  • Size

    19.8 MB

  • Updated:

    30-Aug-2015

  • DEVELOPER

    Intel

Description

Versions: - System BIOS - R01.01.1009 - ME Firmware - 03.00.07.168 - BMC Firmware - 01.28.8586 - FRUSDR - 1.08 Changes: - ME status show "Not Ready" in SETUP(MFG mode). - HII - Day information hard coded to always 'Thu' irrespective of date we save in Schedule CC page - System intermittently reboots due to watchdog timer failure. - The description for "boot mode" under advanced controller property gets truncated - Set Boot Mode=UEFI via ITK,"Launch EFI Shell" will disappear. - No video signal when enable ESRT2 UEFI BIOS and Emulex 16002B. - Sysinfo_v13.1.6:some BIOS options should not displayed "Possible Values" in sysinfo_log.txt. - Cannot enter BIOS setup after enabling serial console redirection for serial port B - [E5-16xx] Wrong "Memory Array Handle" mapping cause SMBIOS Type 16/17/19/20 has wrong structure. - [S2600WT] Not calling INT15h handler of iMR when MR OPROM loads - "Intel Embedded Server RAID Technology 2" OpROM not show in BIOS - [E5-16xx] Trigger MBE at channel A1 will get wrong sel log. - BSOD under Windows 2012 R2 when hot plugging NVMe SSD drives - [24HDD] The hot plug function of HSBP cannot work normal. - Pressing multiple F6 from SOL skips through boot manager. - BMC DHCP HOST NAME can not be changed if DMN is DYNAMIC and BMC - HW RAID HII: Arrow listing is not displayed correctly when lines - Help to integrate the LAN OPROM20 oprom. - System sporadically hangs at post code 0x89 - [24HDD] The value of OEMID at ACPI table is not expected value. - No Error Message display when boot into unsigned OS with secure boot enable - ME status error with ME force update jumper - SUT will get IERR event when enable secure boot via ITK or Syscfg. - Windows 2012 R2 reboot cycle failed. - [S2600WT] System locks up during OS DC cycling test - [S2600WT] Dmesg record. Corrupted low memory after finish SLES 12 installation - [S2600WT] VTK-125R2 can't execute. - Conflict message in Linux when serial port A is set as 0x2f8 and IRQ3 - After change "Active Processor Cores" , then press F10 to save Setup menu, it will pop up a fail screen as picture. - Memory speed changes when POR setting is disabled and with a specific CPU - 3 DIMMS per channel Important Note: - BIOS SETTINGS WILL BE ERASED with this update. About OS Independent BIOS: Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed. In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk. When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS. Still, regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit. The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly. Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable. About Firmware Updates: Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features. On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible. When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method. As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit. Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

Related topics

User Comments( 0 )

Make

submit